Notes for Commercial Sweet Popcorn Machine

Notes for Commercial Sweet Popcorn Machine:

 

First, You must know before using:

  1. leakage protection switch should be used in model Commercial Popcorn Machine.

  2. popcorn machine should be kept at room temperature below 40 ℃, ventilated, non-corrosive gas environments under.

  3. Equipment should lie flat with less than 3 ° tilt fuselage appropriate.

 

Second, transportation and storage:

  During transport, popcorn machine surrounded by should be handled with care to prevent the severe vibration, packaged popcorn machine

Usually not a long-term open storage, should be placed in ventilated, non-corrosive gases warehouse shall not upside down,

Deposit required on a temporary open-air place, measures should be taken rain.

 

Third, Instruction manual:

  Electrical connection and installation required to hold a license electrician install, installed after properly.

 

  1. Plug plug energized, pressing the insulation light switches, to lighting and insulation.

 

  2. Turn the heating switch,to warm popcorn pot.

  3. Open the stirring motor switch to refuel, plus corn (maize imported or domestic ball shape corn) and sugar into the pot, you will hear the sound at the beginning of popcorn, popcorn close at the end.

 

  4. Repeat step 3, you can burst more popcorn, each only about 3-5minutes.

  5. put the oil to be careful to prevent burns, , keep the popcorn kettle machine clean.

  6. This commercial popcorn machine has overtemperature protection, when the temperature is higher than the normal operating temperature, over-temperature protection will cut off the power play Paul Protect the machine and user safety.